|
Flutec PP9 is a fully-fluorinated, odourless, colourless liquid.
Flutec PP9 has the following characteristics:-
- Compatibility with most construction materials
- Non flammable
- Excellent chemical and thermal stability
- Practically non-toxic1
Flutec PP9 finds many applications including as a fluid for testing and
cooling in the electronics industry, as a fluid for vapour phase sterilisation
of medical equipment and various energy transfer applications.
Although Flutec PP9 is considered biologically and
chemically inert, good laboratory practice should be observed when
handling. Flutec PP9 has an indefinite shelf life if properly stored
in its original sealed container.
Material safety data sheet
Flutec PP9 is commercially available in quantities of 1kg and above.
| Boiling Point oC |
155 |
| Pour Point oC |
-70 |
| Molecular Weight |
512 |
| Density, kg/l |
1.972 |
| Viscosity (kinematic), mm2/s |
3.25 |
| Viscosity, (dynamic), mPa s |
6.41 |
| Surface Tension, mN/m |
18.5 |
| Vapour Pressure, mbar |
2.9 |
| Heat of vaporisation at Boiling
Point, kJ/kg |
75.5 |
| Specific Heat, kJ/kg oC |
1.09 |
| Critical Temperature, oC |
313.4 |
| Critical Temperature, K |
586.6 |
| Critical Pressure, bar |
16.60 |
| Critical Volume, l/kg |
1.5 |
| Resistivity ohm.cm |
>1013 |
| Dielectric Breakdown Strength kV/mm
50Hz |
>19 |
| Thermal Conductivity, mW/m oC |
57.5 |
| Expansion Coefficient, oC-1(0oC) |
0.000974 |
| |
|
Temperature dependant properties
are quoted at 25oC unless otherwise stated.
The above typical physical properties, in no way form or represent product
specification. |
| |
|
|
| |
Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ‘Practically
Non-Toxic1 is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LIST ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|
