|
Flutec PP6 is a fully-fluorinated, odourless, colourless, non-volatile liquid
which chemically is perfluorodecalin, a mixture of cis and transisomers, C10F18.
Flutec PP6 has the following characteristics:-
- Non-toxic
- Non flammable
- Excellent chemical and thermal stability
- High solubility for gases particularly oxygen.
Although Flutec PP6 is considered biologically and
chemically inert, good laboratory practice should be observed when
handling. Flutec PP6 has an indefinite shelf life if properly stored
in its original sealed container.
Material safety data sheet
Flutec PP6 is commercially available in quantities of 1kg and above.
| Boiling Point oC |
142 |
| Pour Point oC - for typical
cis/trans mixture |
-8 |
| Molecular Weight |
462 |
| Density, kg/l |
1.94 |
| Viscosity (kinematic), mm2/s |
2.66 |
| Viscosity, (dynamic), mPa s |
5.10 |
| Surface Tension, mN/m |
17.6 |
| Vapour Pressure, mbar |
8.8 |
| Heat of vaporisation at Boiling Point,
kJ/kg |
78.7 |
| Refractive index, nD20 |
1.313 |
| Dielectric Breakdown Strength kV/mm
50Hz |
>18 |
| |
|
| Temperature dependant properties are quoted
at 25oC unless otherwise stated. |
| |
|
|
| |
Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ‘Practically
Non-Toxic1 is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LIST ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|