|
Flutec PP3 is a fully-fluorinated, odourless, colourless liquid.
Flutec PP3 has the following characteristics:-
- Compatibility with most construction materials
- Non flammability
- Excellent chemical and thermal stability
- Practically non-toxic1
Flutec PP3 finds many applications including as a fluid for testing
and cooling in the electronics industry and also as a fluid for curing
low temperature cure resin systems and in various energy transfer
applications.
Although Flutec PP3 is considered biologically and
chemically inert, good laboratory practice should be observed when
handling. Flutec PP3 has an indefinite shelf life if properly stored
in its original sealed container.
Material safety data sheet
Flutec PP3 is commercially available in quantities of 1kg and above
| Boiling Point oC |
102 |
| Pour Point oC |
-70 |
| Molecular Weight |
400 |
| Density, kg/l |
1.828 |
| Viscosity (kinematic), mm2/s |
1.06 |
| Viscosity, (dynamic), mPa s |
1.919 |
| Surface Tension, mN/m |
16.6 |
| Vapour Pressure, mbar |
48 |
| Heat of vaporisation at Boiling Point,
kJ/kg |
82.9 |
| Specific Heat, kJ/kg oC |
0.963 |
| Critical Temperature, oC |
241.5 |
| Critical Temperature, K |
514.7 |
| Critical Pressure, bar |
18.81 |
| Critical Volume, l/kg |
1.520 |
| Resistivity ohm.cm |
>1013 |
| Dielectric Breakdown Strength kV/mm
50Hz |
>20 |
| Thermal Conductivity, mW/m oC |
60.4 |
| Expansion Coefficient, oC-1(0oC) |
0.00123 |
| |
|
Temperature dependant properties are quoted
at 25oC unless otherwise stated.
The above typical physical properties, in no way form or
represent product specification. |
| |
|
|
| |
Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ‘Practically
Non-Toxic1 is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LIST ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|
