|
Flutec PP25 is a fully-fluorinated, odourless, colourless liquid.
Flutec PP25 has the following characteristics:-
- Compatibility with most construction materials
- Non flammable
- Excellent chemical and thermal stability
- Practically non-toxic1
Flutec PP25 finds many applications in the electronics industry including
as a fluid for vapour phase soldering of higher melting point solders and in
condensation inert heating equipment for curing resin systems or melting high
melting point thermoplastic powder coats.
Although Flutec PP25 is considered biologically
and chemically inert, good laboratory practice should be observed
when handling. Flutec PP25 has an indefinite shelf life if properly
stored in its original sealed container.
Material safety data sheet
Flutec PP25 is commercially available in quantities of 1kg and above.
| Boiling Point oC |
260 |
| Pour Point oC |
-10 |
| Molecular Weight |
774 |
| Density, kg/l |
2.049 |
| Viscosity (kinematic), mm2/s |
56.1 |
| Viscosity, (dynamic), mPa s |
114.5 |
| Surface Tension, mN/m |
19.4 |
| Vapour Pressure, mbar |
<1 |
| Heat of vaporisation at Boiling
Point, kJ/kg |
67.9* |
| Specific Heat, kJ/kg oC |
0.957* |
| Critical Temperature, oC |
400.4* |
| Critical Temperature, K |
673.6* |
| Critical Pressure, bar |
11.34* |
| Critical Volume, l/kg |
1.574* |
| Resistivity ohm.cm |
>1013 |
| Thermal Conductivity, mW/m oC |
63.8 |
| Expansion Coefficient, oC-1(0oC) |
0.00084 |
| |
|
*Estimated value
Temperature dependant properties
are quoted at 25oC unless otherwise stated.
The above typical physical properties, in no way form or represent product
specification. |
| |
|
|
| |
Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ‘Practically
Non-Toxic1 is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LIST ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|
