|
Flutec PP11 is a fully-fluorinated, odourless, colourless liquid.
Flutec PP11 has the following characteristics:-
- Compatibility with most construction materials
- Non flammable
- Excellent chemical and thermal stability
- Practically non-toxic*
Flutec PP11 finds many applications in the electronics industry, including
as a fluid for vapour phase soldering, condensation inert heating, fluid for
testing and direct contact cooling.
Although Flutec PP11 is considered biologically
and chemically inert, good laboratory practice should be observed
when handling. Flutec PP11 has an indefinite shelf life if properly
stored in its original sealed container.
Material safety data sheet
Flutec PP11 is commercially available in quantities of 1kg and above.
| Formula |
C14F24 |
| Boiling Point, oC |
215 |
| Pour Point, oC |
-31 |
| Molecular Weight, |
624 |
| Density, kg/l |
2.03 |
| Viscosity (kinematic), mm2/s |
13.99 |
| Viscosity, (dynamic), mPa s |
28.4 |
| Surface Tension, mN/m |
|
| Vapour Pressure, mbar |
<1 |
| Heat of vaporisation at boiling point,
kJ/kg |
68 |
| Specific Heat, kJ/kg oC |
|
| Oxygen solubility, ml per 100 ml |
|
| Refractive index, nD20 |
1.3348 |
| Resistivity, ohm cm |
>1013 |
| Dielectric Breakdown Strength, kV/mm
50Hz |
>18 |
| |
|
| Temperature dependant properties are quoted
at 25oC unless otherwise stated. |
|
| |
* Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ' Practically
non-toxic' is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LISTED ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|