|
Flutec PP10 is a fully-fluorinated, odourless, colourless liquid.
Flutec PP10 has the following characteristics:-
- Compatibility with most construction materials
- Non flammable
- Excellent chemical and thermal stability
- Practically non-toxic1
Flutec PP10 finds many applications as a fluid for use in the electronics
industries, including vapour phase soldering, condensation inert heating, fluid
for testing and direct contact cooling.
Although Flutec PP10 is considered biologically
and chemically inert, good laboratory practice should be observed
when handling. Flutec PP10 has an indefinite shelf life if properly
stored in its original sealed container.
Material safety data sheet
Flutec PP10 is commercially available in quantities of 1kg and above.
| Boiling Point oC |
194 |
| Pour Point oC |
-40 |
| Molecular Weight |
574 |
| Density, kg/l |
1.948 |
| Viscosity (kinematic), mm2/s |
4.84 |
| Viscosity, (dynamic), mPa s |
9.58 |
| Surface Tension, mN/m |
19.7 |
| Vapour Pressure, mbar |
<1 |
| Heat of vaporisation at Boiling
Point, kJ/kg |
71* |
| Specific Heat, kJ/kg oC |
0.92* |
| Critical Temperature, oC |
357.2* |
| Critical Temperature, K |
630.2* |
| Critical Pressure, bar |
16.2* |
| Critical Volume, l/kg |
1.59* |
| Resistivity ohm.cm |
>1013 |
| Dielectric Breakdown Strength kV/mm
50Hz |
>13 |
| Thermal Conductivity, mW/m oC |
56 |
| Expansion Coefficient, oC-1(0oC) |
0.00078 |
| |
|
Temperature dependant properties
are quoted at 25oC unless otherwise stated.
The above typical physical properties, in no way form or represent product
specification.
*estimated value |
| |
|
|
| |
Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ‘Practically
Non-Toxic1 is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LIST ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|
