|
Fully-fluorinated, odourless, colourless liquid.
Flutec PP1 has the following characteristics:-
- Compatibility with most construction materials
- Non flammable
- Excellent chemical and thermal stability
- Practically non-toxic1
Flutec PP1 finds many applications as a fluid for use in the electronics
industries for testing and heat transport.
Although Flutec PP1 is considered biologically and chemically inert,
good laboratory practice should be observed when handling. Flutec PP1
has an indefinite shelf life if properly stored in its original sealed
container.
Material safety data sheet
Flutec PP1 is commercially available quantities of 1Kg and above.
| Boiling Point oC |
57 |
| Pour Point oC |
-90 |
| Molecular Weight |
338 |
| Density, kg/l |
1.682 |
| Viscosity (kinematic), mm2/s |
0.39 |
| Viscosity, (dynamic), mPa s |
0.656 |
| Surface Tension, mN/m |
11.1 |
| Vapour Pressure, mbar |
294 |
| Heat of vaporisation at Boiling Point,
kj/kg |
85.5 |
| Specific Heat, kJ/kg oC |
1.09 |
| Critical Temperature, oC |
177.9 |
| Critical Temperature, K |
451.1 |
| Critical Pressure, bar |
18.34 |
| Critical Volume, l/kg |
1.582 |
| Resistivity ohm.cm |
>1013 |
| Dielectric Breakdown Strength kV/mm
50Hz |
>16 |
| Thermal Conductivity, mW/m oC |
65.3 |
| Expansion Coefficient, oC-1(0oC) |
0.00159 |
| |
|
Temperature dependant properties are quoted
at 25oC unless otherwise stated.
The above typical physical properties, in no way form or
represent product specification. |
| |
|
|
| |
Note: The toxicity rating used is published by Gleason, M N Gosselin,
R E and Hodge, H C (Clinical Toxicology of Commercial Products, Baltimore
1963). ‘Practically
Non-Toxic1 is the lowest rating of toxicity and relates to
a lethal dose in man of more than 1Kg for a 70kg (150lb) man.
IF YOU REQUIRE SPECIFIC DATA THAT IS NOT LIST ABOVE PLEASE CONTACT
US WITH YOUR REQUEST .
|
